Buy Star Trek Costumes and More

You have the conn of the USS Enterprise. Captain James Tiberius Kirk's command chair! Full-size reproduction from the Star Trek: The Original Series TV show. Built by Steve Horch of HMS Creative Productions for Roddenberry. Handcrafted to the exact standards of the original! Made in the USA. Here's your chance to own the most iconic and well-known piece of furniture in television history! This authentic recreation of Captain Kirk's command chair will turn any room of your home or office into the bridge of the USS Enterprise. Just sitting in this handcrafted and set-accurate replica will make you want to give an order to fire phasers or raise shields. It's sure to be the most talked about piece of furniture in your home or office for many years to come! Back in the 1960s, the command chair was constructed by placing plywood around an obscure piece of Dutch office furniture and then adding wiring, lights, and switches. While the builders of the original set piece are no longer with us, that original command chair was found in the early 1990s and used as reference to construct an exact replica to be used for the sixth season Star Trek: The Next Generation episode "Relics" for a holodeck recreation of the bridge of the original Enterprise. It would again appear nearly 15 years later in a mirror universe episode of Star Trek: Enterprise. Now, the same builder of this command chair replica for Star Trek, Steve Horch, recreates it once again for you. Based on countless photographic references of the original set piece, Steve and his company, HMS Creative Productions, builds a command chair virtually identical in appearance to what was seen on the original Star Trek . The chair measures approximately 40-inches tall x 38-inches wide x 40-inches long. The base measures about 35-inches wide x 42-inches long. Additional space will be needed for the swiveling chair to move freely. The chair assembly itself is 38-inches wide, but its corners may stick out beyond the base when it's being rotated. Authentic reproductions of all the switches and lights, plus the communications speaker, add intricate detail. This chair is comprised of hard woods and a formica finish. The chair features one included sound-- the hailing frequency or "Swain" sound. All the lights are high-brightness LEDs to aid in the reduction of the amount of heat that an original 1960s incandescent lighting system would produce, and all the indicators are colored transparent plastic castings based on the shapes seen as part of the original chair. All electronics are wired to an AC adaptor with a power cord coming out of the chair platform base for plugging into any 110V outlet. If you're sitting in the chair, the buttons on the left-hand side activate LEDs which light up the translucent fixtures within the controls. The eight switches all move and operate a single circuit that can be controlled by any of the switches. On the right-hand side, each w

Own Mr. Spock's Vulcan lute! Replicated to exact standards in the original Star Trek TV series! Hand-crafted musical instrument reproduction. Recreated for Roddenberry by prop makers HMS Creative Productions. Does not play music, but it's undeniably awesome! "Other cultures, among them certain Vulcan offshoots, use musical notes as words." - Mr. Spock. Now you, too, can cherish your very own Vulcan lute, hand crafted to appear exactly as it did in the original Star Trek television series, down to the monofilament string system. This Vulcan Lute is a made-to-order, high-end piece for your collection. It comes with an attractive display stand. Finely crafted of mahogany with a teak veneer and walnut accents, it's stained in certain areas for detailing, with a clear lacquer finish. The Vulcan Lute itself measures 16 1/2-inches wide x 39 1/2-inches long x 3 1/4-inches thick. Although the instrument reproduction will not play musical notes and is not tunable, it remains one of the most attractive and distinctively Star Trek prop replicas to be found anywhere¦ truly the pride of a discerning collector. Spock's Vulcan lute made its first appearance in one of the earliest Star Trek episodes, "Charlie X," and Spock would play it three more times during the course of the original series. A replica was later used in the fifth Star Trek feature film and was subsequently seen in a mirror universe episode of Star Trek: Deep Space Nine. Then, in Star Trek: Voyager, Mr. Tuvok made two references to playing his own Vulcan lute. Originally sculptured for Star Trek back in 1966 by Wah Chang from a single piece of wood (likely poplar or some other wood that was available in the large width needed), the lute prop was never intended to play actual musical notes. Wah stringed it using a single strand of nylon monofilament line strung twelve times up and down the instrument, coloring some strings to give them a different look. The lute was finished with airbrushed stains. Wah added a distinctive large knob on the front, which may have simply been the top of a Japanese or Chinese rice bowl. In the 1970s, the lute was painted black and used in an episode of Mork and Mindy, along with various other Star Trek props and costumes. According to sources, the lute was later discovered underneath one of Paramount's sound stages in the 1990s during the run of Star Trek: The Next Generation. This original lute and all of its parts were then carefully traced and recreated by HMS Creative Productions, prop makers for Star Trek for over two decades. HMS was hired to build precise Vulcan lute replicas that were used at Star Trek: The Experience in Las Vegas. Now you, too, can cherish your very own Vulcan lute, hand crafted to appear exactly as it did in the original Star Trek television series, even down to the monofilament string system. Because the original type of wood used remains a mystery, HMS has caref

Ancient, alien, and most of all¦ Klingon! Imperial necklace worn by actor David Warner as Klingon Chancellor Gorkon. As seen in Star Trek VI: The Undiscovered Country. Meticulously crafted reproduction for Roddenberry by Studio Art Metal Shop. Molded from the same models used in the film. Nearly 30 individual pieces, hand-linked together for this elaborate design! "I offer a toast. The undiscovered country. The future." - Klingon Chancellor Gorkon. When you order this amazingly detailed and intricate replica of the piece worn by actor David Warner in Star Trek VI: The Undiscovered Country, please understand that you're buying a meticulously crafted piece requiring numerous hours to cast and assemble by hand. Studio Art Metal Shop never mass produces any item they make. Featuring nearly 30 individual pieces, hand-linked together for an elaborate design, this breathtaking piece has been molded from the exact same models that were used back in 1991, and is cast in the same lead-free pewter, plated in antique nickel. The plating increases the durability of the piece and gives it the look of an ancient worn metal. By using modern spin casting, the necklace picks up even more fine detail than the older sand-casting method used in the past. The Klingon Chain of Office comes with a stand to attractively display the full piece. It's ancient, it's alien, and most of all¦ it's Klingon! Please allow 6 to 8 weeks for production and delivery. Please note: Originally, two different necklaces were produced for the 6th film. One was intended for David Warner. The other was made for Rosanna DeSoto, the actress portraying Gorkon's daughter Azebur. Because of her smaller body size, several links were removed to make the 2nd necklace fit her better. The replica necklace being sold here is the full piece, identically recreating to the exact specifications the complete, larger necklace worn by David Warner. In 1979, legendary Star Trek costume designer Robert Fletcher hired the Studio Art Metal Shop to create jewelry, armor, and other regalia for Star Trek's many alien cultures. This relationship between Paramount's Star Trek Production Department and the Studio Art Metal Shop lasted for decades, with the artisans at Studio Art crafting the rank insignia for the Starfleet duty uniforms, elaborate costume accessories for the Vulcans and many other races, and becoming the de facto experts on Klingon wardrobe accoutrements throughout the various films and subsequent television series. When the time came to create the regal appearance of Klingon Chancellor Gorkon (masterfully portrayed by actor David Warner in Star Trek VI: The Undiscovered Country, ) Studio Art Metal Shop was told to design an elaborate imperial necklace for the Chancellor to wear around his neck. Based on the rich, historical "Chain of Office" necklaces presented to honored recipients throughout the centuries by European heads of state, this Klingon ne

Authentic phaser rifle replica! From the Star Trek: First Contact movie. Produced using the original master tooling! Hand-painted finishing, with lights and sounds. Includes shoulder strap, display stand, and more. The First Contact Phaser Rifle Prop Replica was produced using the original master tooling. In addition to Star Trek: First Contact, this prop also appeared in Star Trek: Insurrection and was used as the base for the modified rifle from Star Trek: Nemesis. This fully assembled prop replica includes the following features and upgrades: Operational power bar electronics Soundboard and speaker with custom sound effects Independently lit scope Functional light emitter for the front of the barrel Three red LEDs for the side for the rifle Battery holder ("AAA" batteries included) Two separate power switches (main power and front scope light) Retractable assembly sling (shoulder strap) Custom-made display stand (a Roddenberry exclusive) Hand painting and finishing Certificate of authenticity Advanced phaser rifles, capable of firing pulse bursts as well as the standard beam, were used in the 2370s. These rifles had a pistol grip and either an under-barrel grip or a second vertical grip underneath the barrel (similar to conventional firearms of times past), and were capable of being modified with various types of scopes, barrels, and power cells.

Tricorder seen in DS9 and Voyager! Star Trek replica created from the original master tooling. Screen-accurate lights and sounds, plus a removable hand scanner. From Roddenberry. Hand built in the USA. The Mark X Medical Tricorder as conceived and hand built by the team of Moore and Horch for use on Star Trek became the next generation of Federation tricorder. This version was smaller, had more flashing lights, and could last longer on a set of batteries than the previous generations. Used on Deep Space Nine, Voyager, and the last three Star Trek movies, this prop is replicated here from original master tooling. This sensational reproduction features an authentic LED sequence and graphic overlays, along with screen-accurate sound effects (including "ratchet open" feature) and a removable hand scanner with independent LED effects! It comes with a custom display stand and certificate of authenticity. Dr. McCoy could have used one of these! The tricorder of the 23rd century was a heavy, black, rectangular device with a small screen and a shoulder strap. The medical variants of this model had the detachable scanner stored in the bottom when not in use, as opposed to the front, giving this model the same overall profile regardless of its intended use. The 24th-century unit is a small, gray, square model with a flip-out panel to allow for a larger screen. Later on, this design was further refined with a slightly more angular appearance that was seen on most of the The Next Generation era movies, as well as later seasons of Deep Space Nine and Voyager.

Screen accurate, with strobing lights, sounds, and a rotating power selector! As featured in Star Trek: The Original Series. Replica of the phaser rifle used by Captain Kirk in the second pilot episode! Mastered using original prop references. This outstanding collectible is made in the USA. Featured in Star Trek: The Original Series, Roddenberry is proud to present the phaser rifle used by Captain Kirk in the second TOS pilot episode "Where No Man Has Gone Before." This fantastic reproduction of that prop features screen-accurate sound, strobing LED light effects, a rotating power selector, a custom display stand, and a certificate of authenticity. The 1:1 scale TOS Phaser Rifle is mastered using original prop references and constructed from resin castings, machined acrylic tubes, laser-cut acrylic, and cast aluminum parts. It's a truly outstanding collectible! Made in the USA.

Beam up this stellar collectible! Signed by the entire cast! Numbered, limited edition of only 250 pieces. Double matted and framed in black metal. This one-of-a-kind Star Trek The Next Generation Photograph has been personally hand signed in silver ink by Michael Dorn, Gates McFadden, Jonathan Frakes, Marina Sirtis, LeVar Burton, Patrick Stewart, and Brent Spiner. The photo is double matted and handsomely framed in black metal with an individually numbered text plate. This astounding, 24-inch tall x 22-inch wide presentation is a limited edition of only 250 pieces. A certificate of authenticity is included. Proudly display this stellar collectible in your home or office for all generations to see and admire!

Tricorder seen in DS9 and Voyager! Star Trek replica created from the original master tooling. Screen-accurate lights and sounds. From Roddenberry. Hand built in the USA. The Mark X Science Tricorder as conceived and hand built by the team of Moore and Horch for use on Star Trek became the next generation of Federation tricorder. This version was smaller, had more flashing lights, and could last longer on a set of batteries than the previous generations. Used on Deep Space Nine, Voyager, and the last three Star Trek movies, this prop is replicated here from original master tooling. This sensational reproduction features an authentic LED sequence and graphic overlays, along with screen-accurate sound effects (including "ratchet open" feature). It comes with a custom display stand and certificate of authenticity. Mr. Spock could have used one of these! The tricorder of the 23rd century was a heavy, black, rectangular device with a small screen and a shoulder strap. The medical variants of this model had the detachable scanner stored in the bottom when not in use, as opposed to the front, giving this model the same overall profile regardless of its intended use. The 24th-century unit is a small, gray, square model with a flip-out panel to allow for a larger screen. Later on, this design was further refined with a slightly more angular appearance that was seen on most of the The Next Generation era movies, as well as later seasons of Deep Space Nine and Voyager.

Never leave the Enterprise without one! TOS Tricorder Replica seen in Star Trek: Deep Space Nine. By prop makers Steve Horsch and Michael Moore. Instrument features lights, sounds, a spinning motor, and more! Hand built for Roddenberry in the USA. Mr. Spock would never leave the Enterprise without one... so why should you? This terrific reproduction is taken directly from the master tooling used to create the tricorders seen in the Star Trek: Deep Space Nine recreation "Trials and Tribble-ations." The hand-built, painted, and functional TOS Tricorder Replica features the craftsmanship of professional prop makers who worked on the show. The Tricorder is made out of vacuum-formed plastic and aluminum parts. Re-mastered to exact detail by Steve Horsch and Michael Moore, who are both dedicated Star Trek design researchers, this is the final word on this great props piece. It's a completely built 1:1 scale prop replica that features lights and sounds, along with a spinning moiré motor, genuine-leather strap, and display stand. This iconic piece is a must for Trek fans and prop enthusiasts alike!

An essential collectible! Faithful 1:1 scale reproduction of the Starfleet Assault Phaser! Seen in Star Trek V: The Final Frontier and Star Trek VI: The Undiscovered Country. Made in the USA by Roddenberry. Features lights, sounds, a sliding pistol hood, rapid fire, and more. Plus a removable Phaser 1! Lights, sounds, rapid fire! As seen in the last two motion pictures featuring all of the original series main cast, Star Trek V: The Final Frontier and Star Trek VI: The Undiscovered Country, this is a faithful 1:1 scale reproduction configured as a hero prop with a sliding pistol hood, removable energy-cell magazine, individually numbered Starfleet ID plate, and even a removable Phaser 1 inset into the pistol! The Assault Phaser Prop Replica features 3 LED light effects, an on/off switch with "power on" sound effects, rapid-fire capability with custom sound effects, a custom display stand, and a certificate of authenticity. It's an essential addition to your trove of Star Trek collectibles!

Set phaser to awesome! Hand built in the USA. Electronic components, with lights! Comes with display stand. Own a piece of sci-fi history! This completely built, painted, and functional TOS Phaser II Prop Replica includes a removable Phaser I and a hand-painted display stand. Both units feature electronic components that produce lights. Hand built by professionals who created the screen-filmed props, this realistic reproduction is essential for any fan or collector. The Phaser is made out of cast-plastic, acrylic, brass, aluminum, and white metal. Every 1:1 scale piece is presented in the highest detail, from the aiming window in front to the machined rotating barrel. Own a piece of sci-fi history! The Phaser II is the original Star Trek must-have item. Many have tried to duplicate it, with little or no success. This prop, however, was created by HMS Creative Productions for the Star Trek: Deep Space Nine episode entitled "Trials and Tribble-ations.

It's like holding a real phase pistol in your hand! 1:1 scale phaser reproduction derived from Star Trek. Made in the USA for Roddenberry. Features authentic lights and sounds! Complete with hinged body and display stand. This 1:1 scale Phase Pistol Prop Replica was produced using an original phase-pistol prop and hero-prop reference from Star Trek. Manufactured for Roddenberry, it was production mastered by Steve Horch, Michael Moore, Scott Brodeen, Kurt Zendler, and Robert Mannion. This superb reproduction features a hinged main body, removable power cell, 2 LED light features, authentic sound effects, and custom display stand. It's like holding the real thing in your hand!